old chevy truck

  1. 1955 Chevrolet First Series ½ Ton Pickup

    A very unique year for General Motors trucks. This was a split year! Two different body styles were displayed at different times at the dealerships. They are referred to as the 1955 First and 1955 Second Series. Why did this happen? Many have said: It is easy, Follow the Money! With limited changes in Chevrolet cars since 1949, it was...
  2. One Passenger Trucks

    These commercial vehicles (the Panel Truck and Canopy Express) were designed by GM for local delivery purposes. They usually came with a seat for one delivery driver. A second passenger was not needed so the company that bought the new vehicle saved the cost of a passenger seat. Yes, the passenger seat on the panel truck was a factory option...
  3. 1940 Chevrolet Canopy Express

    We hope this article provides you with interesting data on one of the rarest early Chevrolet ½ ton trucks. They are a part of our country’s history during the 1930’s through the mid 1950’s. These little ½ tons ( with only a seat for the driver), provided a convenient method of selling groceries and related items to residential neighborhoods that...
  4. 1937 Chevrolet Panel Truck

    Its 1947! A 14 year old Burt Fulmore thinks of a method of getting to school each day from his home in the small town of Economy to Bass River, Nova Scotia Canada, seven miles away. (This island province in eastern Canada is 450 miles above the US most northern state of Maine). He knows his father’s 1937 panel truck...
  5. 1967-72 Chevy/GMC Suburban Wood Floor

    During a local truck show in the summer of 2021, several from Jim Carter Truck Parts noticed a very special deluxe 1972 Chevrolet Suburban. It certainly stood out among the nicer vehicles in this well attended show. It is owned by Linda Grout of Chouteau, Oklahoma. You can read more on this Suburban in our feature Truck of the Month...
  6. 1934-46 Door Striker Adjustment

    Few owners of these years of Chevy/GMC trucks have any idea that a hidden adjustment door plate is built behind the actual door striker plate. Unless you read the owner’s manual that was in the glove box when the truck was new it is unknown. Check the attached photos: The back side of the striker plate has about 13 horizontal...
  7. 1941 Chevrolet ½ Ton Panel Truck

    Jim Carter Truck Parts, in our Feature Truck of the Month series, we try to find examples that are just a little different. This month’s 1941 Panel truck certainly fits in this category! Jeff Stires of Conway, Arkansas is the proud owner and builder of this unusual ½ ton Panel truck. At first glance, it appears to be another great...
  8. 1951 Chevy Bus

    Owner: Butch Voigt This month’s Feature Truck certainly follows our trend of finding the more unusual among early Chevrolet and GMC vehicles.  This may be the only survivor of a 1951 Chevrolet 1 ton with a 16 passenger body. Chevrolet provided the 131” wheel base chassis with fenders, hood, grille, etc. See photo. The passenger part was made by the Carpenter Body...
  9. American Ingenuity

    Make Your Own Flatbed: Needed are some logs without bark and a table saw. Cut in half and add tongue and groove. You have a truck flatbed! Maybe even better than hauling heavy merchandise on an original 1 ½ or 2 ton!
  10. 1953 Advanced Design Canopy Express

    Owners: John and Michele Dunkirk We have always assumed that less than 100 Advance Design Canopy Express trucks remain. If you ever see one restored or not restored, you should stop and take note. They are a part of our nation’s history. They carried groceries in neighborhoods with one car families during the years they were built. The husbands drove...
  11. 1961 Chevrolet Truck Assembled in Brazil

    During 2012 National Convention of the American Truck Historical Society, we met some real truck enthusiasts that had traveled to the show from Brazil. One was, Antonio Sergio Hurtago, an owner of an older American truck museum in San Paulo. Jim Carter Truck Parts was given a very interesting current 12 month calendar from this museum. The most surprising page featured a...
  12. 1939 GMC Panel Truck

    Owner: Paul Flammang It’s another era in our country. We were just coming out of the Great Depression. Employment was on the upswing and car sales were better than since the 1920’s. Families with a little more income began to move away from the downtown centers and new neighborhoods were developing at the edge of cities. Public transportation began serving...
  13. 1971 Chevy Blazer

    Owner: Russell Penniston A one family owned 4x4 Blazer bought new in 1971! George Penniston purchased it to drive to the various job site locations of his construction company. This go anywhere vehicle was necessary to reach off road job sites through mud and snow. George bought it at Parrish Chevrolet in Liberty, MO. It lacked only one option he...
  14. 1948 Chevy Truck – Heartbeat of America

    1948 Chevy Truck –“ Heartbeat of America” Owner: Luke Stefanovsky This was my 1st project of this sort after dreaming about it for years. I did not start the restoration, but have finished the interior, exterior, the engine bay, and performed some undercarriage work. Once starting the restoration, I was “all in”! It became a great stress-reliever from the daily...
  15. 1936 Chevy Half Ton

    Owner: Pat O'Brien This rare little ½ ton survived its 75 years mostly because it stayed with one family; it probably never ventured beyond the city limits, and was used mostly by a mechanic that lived in an area of dry air that discouraged metal rust. For the trucks first two years, it was driven by Virginia Swaim to high...
  16. 1941-1946 Park light and Headlight Assemblies

    The parking light assembly on the 1941 Chevrolet and GMC Pick-up Trucks was placed on top of the headlight bucket. From 1942 through 1947, GM used a much less expensive park light housing on civilian trucks.
  17. Nuts Molded from Epoxy Cement

    The next time you can't find a nut to fit a special bolt, try making your own by filling an oversized nut with epoxy cement and molding the threads. Seat the nut in modeling clay before pouring in the epoxy. Grease the bolt, then screw it down through the epoxy into the clay. Wait a day, unscrew the bolt from...
  18. 1945 Chevrolet House of Magic

    Owner: Dirk Spence A magic show unlike anything you've ever seen! Equally important to GM truck people is that all of this has been totally transformed on a 1945 Chevrolet 1 1/2 ton truck. The truck owner and professional magician is Dirk Spence of Tinley, Illinois (a suburb of Chicago). It all began in 1980 when Dirk was given a...
  19. 1946 Chevy Short Bed Pickup

    Owner: John Thompson This 1946 Chevy short bed from Pittsburg, Kansas, may look stock, however, it's anything but! It is a blend of the character of the pre-war vehicles mixed with today's technology. When I bought the truck it was almost all stock but it was in pieces strewn between 3 garage stalls. The truck is all steel and had...
  20. Aftermarket Dual Rear Wheels

    What a unique invention. When you have a 1947 through 1959 single rear wheel 3/4 or 1 ton GM truck and need more pulling power, this is the answer. American ingenuity at its best! This new steel center hub extension includes eight long bolts to reach the original wheel studs. This holds the factory wheel in place and then provides...
  21. 1947-54 Radio Antenna Installation Warning

    It is very important where to drill the hole for the new radio antenna. The results of making a slight mistake will stay in your mind for many years to come! Radios during these 1947-54 Advance Design years were never installed at the factory. This was done by the authorized GM Dealer. In the box that contained the new radio...
  22. 1953 Chevrolet 1/2 Ton

    Year/Make 1953 ChevroletOwner: Dave and Pat Moore This month's feature truck is a 1953 Chevy ½ ton by Dave and Pat Moore ofKansas City, KS. Dave is our company technical advisor and talks to hundreds ofpeople each week helping with the many questions that come his way. Dave is a 'hands-on' person and has personally done repairs and upgrades onmany...
  23. 1953 Chevrolet

    Year/Make 1953 Chevrolet Owner: Richard & Lorie Baranek On my side of the story! from "Broadway Bob" at Auto Rehab. It was a project that took almost 1 1/2 years to complete. I started working on it from in a small 20x20 garage attached to my house . I was in the process of building a new 40x50 garage...
  24. 1950 Chevrolet Deluxe 1/2 ton

    Owner: Jim Brallier The total restoration of this 1950 Chevrolet Deluxe 1/2 ton came to be because of a "match made in heaven". Jim Brallier of Clearville, PA has this special truck because several things came together just right. He always had a desire to restore an older truck. He was retired after a full career specializing in vehicle mechanical...
  25. 1934-1936 Side Mount Spare Tire Mounting

    During the early years, most roads were not paved and the quality of tires was far from that of today. Thus, tire repair was very big business. It was necessary for vehicle manufacturers to provide the easiest access to the often needed spare tire. Part of driving a car or truck was knowing how to change a tire. On the...
  26. 1934-1936 Vacuum Wiper Motor

    This little vacuum wiper motor has such a unique appearance! They have become quite rare in recent years. Manufactured by Trico for just this truck, it fits above the windshield frame on the left side of cab. A dealer accessory for the right side. They have sometimes been called a "sweetheart" wiper motor due to their strange appearance.
  27. 1956 Opel

    We just couldn't resist placing this approximately 1956 Opel as this month's feature truck. Did you actually think General Motors discarded the famous Advance Design 1947-55 truck cab tooling?
  28. 1946 Chevrolet

    This month we feature a pick up that is used just the way GM intended. It is still a work truck and at 65 years old it is used daily in the greater Kansas City, Missouri, area. The owner is Dennis Odell of Independence, MO. The truck is a 1946 Chevrolet half ton.
  29. A New Truck - 55 Years Old!

    During the recent Mid-West All Truck National's in Riverside, Missouri, a very special truck was on display. It had been brought to the show in an enclosed trailer from Virginia.The owner is George VanOrden of Fulks Run, Virginia and the vehicle is a 1955 Chevrolet Suburban with a NAPCO 4x4 system. His personal history, leading to this restored Suburban, is a story by itself. He spent his youth in this mountain section of Virginia only 10 miles from his current home. The interest in 4x4 trucks was early in life as these type trucks were regularly seen on the rough mountain roads in his county. It is not surprising George decided to restore a 4x4 after his retirement after 20 years in the U.S. Marines.
  30. 1948 Chevrolet Suburban

    It's a great day for a car show! This is one of those rare Saturday cruise shows when the temperature, a light breeze, and no rain make it a picture perfect day. A few hundred vehicles, antique and street rods, fill the parking spots gather around the old city square.
  31. 1950 Chevrolet 2 Ton Delivery Truck

    Coca Cola's big yellow delivery truck can been seen for a long way.
  32. 1946 Chevrolet

    The owner is Jim Adams of Pleasanton, California! He has carefully rebuilt this 1946 Chevy 1/2 ton as one that would have been seen in the 1950's. The big difference is that he created it as a high-performance vehicle of 50 years ago during his high school years. For the few that had money in those more difficult times, this is what many wanted to build.
  33. 1953 Chevrolet 2 Ton Moving Van

    1953 Chevrolet 2 Ton
  34. 1953 Chevrolet

    A recently restored 1953 Chevrolet 1/2 ton! This is a perfect example of a "good old truck", brought back from the dead. The owner is Colin Murphy of Summerset, South Dakota. he had an interest to restore an older GM pickup for years. It all came together when a friend offered Colin this little 1/2 ton that was setting behind a storage building in Cheyenne WY.Because of the dry air in Wyoming, even an older vehicle never in a garage has limited body rust. The picture of when he found his truck, six years ago, shows it disassembled but its solid cab had great potential. Colin says he still found two other pickups to use as parts donors. We might say three made one!
  35. 1938 GMC COE

    When it was new, my GMC was a water truck on the Altoona PA fairgrounds. It sat under a big oak tree for many years until the second owner bought it. It didn't have license plate on it until the 1970's. The second owner did a basic restoration and painted it in the same colors and scheme as it was when new. He also put two speed GMC rear end in it, shortened it, and made a fifth wheel out of it.
  36. 1949 Chevrolet Suburban

    One of Roy Asbahr's most special and unique vehicles is a just completed 1949 Chevrolet Suburban. After a 1 1/2 year restoration, it looks showroom new. Roy is a perfectionist in vehicle restoration and this is one of his best yet! The body and paint work was performed by Larry Swiggart.
  37. 1951 Chevrolet Tilt A Whirl

    This is a very unique one of a kind 1951 Chevrolet Tilt A Whirl style Carnival Amusement ride. This vehicle was used back in the day to go around the streets of New York to give rides for 5 cents to the kids who could not afford to go to a regular carnival or amusement park. Unbelievable history for what this truck represents. Basically it rode around and stopped for kids just like the ice cream trucks of today do.
  38. 1946 Chevrolet COE

    Although my family was in the coal business in Washington,D.C. for many years, and for a brief time I drove a tow truck for a living, my truck passion didn't bloom until after I restored my 1946 Chevrolet Cab-Over (COE) and joined ATHS.
  39. 1949 Chevrolet Panel

    I am Udi Cain, a war veteran from Israel. I love the USA and feel that Israel and USA are like one.
  40. 1964 Chevrolet

    Strange but true! This 1964 Chevy 1/2 ton is a rolling autograph book. Due a patriotic feeling, owner Mike Light of Independence, MO decided to use his primered truck to collect the signatures of war veterans and active military.
  41. Spring Noise

    The 1967-1972 - What's That Noise? Gaining speed after you turn onto the highway, your GM truck (1967-1972), moves toward a cruising speed equal to the surrounding traffic. As your engine reaches about 2,000 rpm you suddenly hear a low hum up front. It does not stop as the truck speed increases. If you lower the windows, play the radio...
  42. Forgotten 1972 Highlander

    During 1972, a unique Chevrolet promotional pickup was introduced for a limited time in 1/2, 3/4, and 1 ton models. This truck was designated the 'Highlander'. Unfortunately, it did not have side emblems or related name plates that would cause people to remember this special model. On the actual truck the word Highlander was only listed on the glove box...
  43. Birth of the Blazer

    The debut of the famous 4x4 Chevrolet Blazer was in 1969. It had little competition and stood alone as a combination off-road and daily driver utility vehicle. Chevrolet truck dealers were taken by surprise! Waiting lines soon occurred requesting this new and unique car/truck vehicle. By 1970, production was in full swing. GMC also entered the project this second year...
  44. 1972 Suburban Highlander

    During the late 1970's, trucks accelerated their change from a more commercial work vehicle to one desired by the family as their everyday transportation. During 1967-1972, Chevrolet and GMC introduced names such as CST, Cheyenne and Sierra Grande to show buyers that their trucks were no longer just for work. Options that rivaled cars could now be ordered for their...
  45. 1971 Argentina Truck

    During a recent trip to Buenos Aires, this Argentina built 1971 Chevrolet ½ ton was seen beside a downtown street. Its unique features causes us to take a strong second look. The more we observed this clean little short bed, the more we saw features that were special to this South American Chevy. The driver was not available so we...
  46. 1968-1972 Longhorn

    In recent years seeing the unusual Chevrolet Longhorn or similar GMC Custom Camper (1968-1972) has become a very rare occurrence. These oversize pickups, with 8 1/2 ft. bed floors, were built for work and thus there is a very limited survival rate. Most seen today started life as they were advertised carrying a vacation camper. They were usually more taken...
  47. 1967-1972 Truck Tech

    1967-72 Chevy Truck Model I.D. We hope the following information on Axle, Transmission and Model identification will help many of you with your questions. Accuracy was a concern as we compiled this information. Because GM made so many scheduled as well as unscheduled changes, there is much discussion about these changes. The following is used by permission from Pickups and...
  48. 1967-1970 Panel Trucks

    These years are the 'last of the breed'! Due to the increasing popularity of the new G-series van, panel truck sales had continued to suffer since the mid 1960's. By 1970, General Motors panel truck production came to a halt. GM did not even wait until the end of the body series in 1972! This 'enclosed body on a pickup...
  49. 1967 GMC Super Custom

    The first year of the 1967-1972 series of trucks had various characteristics that were unique to just the first year. For the perfectionist doing an exact restoration, 1967 GMC trucks are always a challenge. Because the 1967 GMC trucks sold in smaller numbers finding one with most of its original components is unusual. Even rarer is locating a GMC Super...
  50. Rear Bumpers

      GM step beds during 1955-1966 are almost the same. They even use identical tailgates. Thus GM did not find it necessary to change the rear bumper stamping during these 12 years. However, there is one important difference which distinguishes the 1955-1959 from 1960-1966 rear stepbed bumpers. During 1960-1966 GM placed two stamped square holes (not in 1955 through 1959...
  51. Introduction of the GM Fleetside

    Though fleetside pickups are the common style today, they certainly had a unique appearance in the late 1950's. Until then, the stepside body style with outside rear fenders was the norm. With smaller horsepower from available engines, the limited hauling capacity in the stepside box was well matched to the existing power plants. If the customer required a pickup with...
  52. GM's First 4x4

    The momentum of four wheel drive popularity definitely began after World War II. The need for this off-road extra during the war forced 4x4 technology to develop at a fast pace. Thus, during the early 1950's, several independent companies began to appear offering a four wheel drive kit for light duty trucks. Major pickup manufacturers were not yet offering this...
  53. 1955-1959 GMC Hood Emblems

    On the task force body style, 1955-1959, the GMC hoods began quite different than Chevrolet. Beginning in 1955 a large opening, 5.25" x 25", was used to hold a set of die cast GMC letters attached to a decorative grille. In 1957 this grille was removed in place of a perimeter ring. Why the less attractive ring was added is...
  54. 1955 1966 Truck Tech

    1955 Second Series-66 Chevy Truck Model I.D. We hope the following information on Axle, Transmission and Model identification will help many of you with your questions. Accuracy was a concern as we compiled this information. Because GM made so many scheduled as well as unscheduled changes, there is much discussion about these changes. The following is used by permission from...
  55. Split Rim Wheels

    Article courtesy of Rob English (rob@oldgmctrucks.com) The issue of multiple piece rims and safety comes up frequently. There seems to be a quick rush to judgment about any rim that has more than one piece, and while certain types of multiple piece rims have indeed been outlawed and are no longer made, many others are not only still in service...
  56. Rear Bumper Options

    Ever wonder why GM pickup rear bumpers became an option for so many years? Jim Carter Truck Parts wanted to know also. Here are the facts:Beginning in 1951 these bumpers became an extra cost option and have remained this way for so many years on most pickup models. The reason relates to trucks being mostly for work. Though protecting the...
  57. New Cigarette Lighter

    Purchasing a 1947-1953 optional cigarette lighter assembly from some vendors provides reproduction that is far from original in appearance. A manufacturer recently offered the optional lighter assembly but used a knob from the headlight of a 1947-1953. There is no similarity to the real lighter! Don't be embarrassed at a show where your vehicle is being judged. Reproduction (above) Image...
  58. Korean War Shortages

      Prices of more valuable metals such as copper and nickel reached their height during mid 1951 through 1953. Though U.S. shortages were much less than in WWII, there were price increases in the market that affected the financial bottom line of auto and truck manufacturers. America almost demanded chrome on cars even if it raised prices. Decorative shiny trim...
  59. First Series Chevrolet

    The 1955 year put Chevrolet on top! All stops were removed in announcing and continual advertising of the totally redesigned passenger car and their first V-8 engine. Television, radio, news papers and dealers regularly told the public that Chevrolets best year had arrived. It was not good timing to also begin an equal advertising campaign for the totally new truck...
  60. Accessories vs Options

      As per GM, accessories during the 1930's through mid 1960's were the extra cost items sold and installed by the approved dealer. The truck was prepared for these during production so the dealership could later add them with less effort. As much as possible GM would punch holes, attach removable plates, press in dimples, etc. to help the dealership...
  61. 1947-1954 Rear Spring Alignment

    Tech Tip from Ron Hansen Wakefield, Massachusetts � Alignment Solution for Installing a Late Model Rear End in a 1947-1954 Pick Up On the original rear end, the spring centerbolt is offset to the front of the spring by 2"to 3". If you install a modern rear end (with an open driveshaft) and retain the original springs, the wheels will...
  62. Lost Engine Numbers

    GM trucks titled prior to the mid-1950's were usually registered using the stamped engine number not the body digits pressed in the door ID plate. This practice has created many problems in later years as states became stricter in titling. Unfortunately, many older vehicles outlast their engine and owners rarely rebuild the originals. To save time and certainly expense, a...
  63. Lost Bumper Bolt

    On 1937-55 1/2 and 3/4 ton rear bumpers there exists an unused center square bumper bolt hole that sometimes brings up questions from restorers. "Why does this hole exist and what is it purpose?" The answer relates to the attitude toward trucks during those years. They were for work and keeping their production cost low was a priority. The bumpers...
  64. GMC 1/2 Ton Long Bed

    Of the many differences between the Chevrolet and GMC 1/2 ton during the early years (1936-54), the GMC offering of a long bed pickup box was one of the more noticeable. Only GMC provided this option. To obtain this extra bed length on a Chevrolet, the buyer ordered a 3/4 ton. This difference existed with the first GMC pickup in...
  65. Home Made Garage

    When you would like to restore your truck and no workshop is available, there is a solution. Most all the repairs can occur in a temporary shop and at a very low cost. Jim Valano of Marion, Indiana is a true example of 'American Ingenuity.' He purchased a 'canvas storage tent' and assembled it at a convenient location. He even...
  66. First GMC Light Duty Pick Up Truck

    Prior to the mid-1930's, the two truck divisions of General Motors, Chevrolet and GMC, were mostly independent companies. If you wanted a 1-1/2 ton and smaller truck, Chevrolet (since 1918) could provide the model just right for your needs. If you needed a 2-ton and larger, GMC was the division to contact. They had been a large truck specialist even...
  67. Demise of the GM Panel Truck

    Even before the 1920's, light commercial hauling using panel trucks had found a loyal growing customer base. With increasing numbers of small businesses and the population gradually moving to the cities, the panel truck found a place in our society. By the 1930's, most all truck manufacturers had designed a panel body to fit on their existing pickup truck chassis...
  68. 1941-1946 1 1/2 Ton Front Bumper

    A major change in large truck Chevrolet front bumpers occurred during there years. Prior to 1946 the 1 1/2 ton bumpers and braces were little more that a heavier guage design of the smaller 1/2 ton. The big bumper change was in 1946. (Possibly this was because Chevrolet introduced its first 2 ton model that year.) Now it was nothing...
  69. 1939 New Zealand Right Hand Drive

    General Motors right hand drive trucks, though unusual in the United States, have always been very popular in specific countries such as Britain, New Zealand, South Africa, and Australia. These vehicles were not produced in the U.S. but came from GM's large assembly plant in Oshawa, Ontario. Due to reversed dash boards, the change in steering components, differences in starter...
  70. 1937-1946 Deluxe Heaters

    Keeping the passenger area warm in cars and trucks during the winter was always a problem in the early years. Not only were the heater fans and cores small but the vehicles used recirculator heaters. Thus, the air in the cab was recirculated rather than using dry outside cold air being brought inside and warmed. This helped for quicker warming...
  71. 1937-1938 Australian Half Ton

    The Australian 1937-38 Chevrolet trucks are much like those in the U.S., however on close observation, one can certainly see unique differences. This United States relative is obviously GM but not quite the same. These Down-Under truck's final assembly point was in the Holden plant in New South Wales, Australia. (Holden is a branch for GM in that country.) Much...
  72. 1936-1942 Coupe Pick Up

    During the great depression of the 1930's, almost half of the automakers ceased business forever. Most remaining manufacturers modified their vehicles and advertising techniques to appeal to a very conservative buyer. With limited disposable income the few people willing to purchase a car or truck were very careful. To help boost or at least hold sales steady, the Chevrolet Division...
  73. 1934-1946 Truck Tech

    1934-1946 Chevy Truck Model I.D. We hope the following information on Axle, Transmission and Model identification will help many of you with your questions. Accuracy was a concern as we compiled this information. Because GM made so many scheduled as well as unscheduled changes, there is much discussion about these changes. The following is used by permission from Pickups and...
  74. 1918-1933 Truck Tech

    1918-33 Chevy Truck Model I.D. We hope the following information on Axle, Transmission and Model identification will help many of you with your questions. Accuracy was a concern as we compiled this information. Because GM made so many scheduled as well as unscheduled changes, there is much discussion about these changes. The following is used by permission from Pickups and...
  75. Screw On ID Plates

    The body I.D. plate - every GM truck had one attached at the factory. Basically it states the vehicle's gross weight limit (weight of truck plus its maximum allowed load) plus stamped digits that give the assembly plant year, size of truck, month built, and sequential numbers as it came off the production line. These plates are necessary for positive...
  76. Trees and Trucks

    Jim Carter Truck Parts viewed so many older salvage yards to find so much of this data by accident! It was just there! There couldn't be an easier place for a tree to grow. If you don't move your truck for a few years, trees will find it. As they grow wider, the truck bends to fit! Here livestock cannot...
  77. White Wall Tires

    Prior to the 1960's, trucks were used as work vehicles. On Friday nights, most were parked for the weekend and the family sedan was the transportation vehicle. It was a conservative era when you bought only basic necessities. A $5.00 grocery purchase was more than most could carry. Finding white wall tires on a truck (even a car) would have...
  78. Wider Wheels on 3/4 Tons 1946-59

    When you need more room for wider 8 bolt non-split rim wheels on your stock 1946-1959 Chevrolet or GMC ¾ ton, there is a solution. (The long tie rod ends prevent the use of wheels much wider than the original split rims.) Customers have given us an answer! It is not difficult and uses all original GM parts. After the...
  79. Right Mirror Arm, Drilling Guide Holes

    The 1947-1955 Chevrolet and GMC came from the factory with left mirror arms on left hand drive trucks. This was particularly important if the truck was to have a large bed that covered the rear window. To keep sale price low, the right mirror arm was an accessory (dealer installed). It was very important that the dealer place the mirror...
  80. Advance Design Mirror Head

      It's surprising that an item placed on almost every 1947-55 Chevrolet and GMC truck has become so impossible to locate. Most collectors have never seen one! The product is the five inch GM round mirror head. It was originally bolted to the cowl mounted mirror arm on the driver's side. They were always black and had the pivot on...
  81. 1947-1948 Recirculator Heater

    The Chevrolet dealer installed recirculator heater was much different in 1947-48. In 1946 and older plus in 1949 through 1957, they sold the traditional round core design but for 1947 and 1948 it was all different.
  82. Advance Design Mirror Arm

      No less than three different mirror arms were used on Advance Design Trucks (1947-1955). Though most vendor catalogs do not reflect these differences, the following should be of interest to those that want their truck restored correctly. All left mirror arms attach to the same position on the cowl, however two designs were used. In the beginning years (1947-50...
  83. 1937 Chevrolet Logging Truck

    Look what a 216 six cylinder can do with a low speed rear end!
  84. 1951 Chevrolet Wrecker

    Life for this 1951 Chevrolet Model 5100 began at the GM assembly plant in Kansas City . Soon after, it was delivered to its new home at a small Chevrolet dealer in Lydon , Kansas . About this time it was also equipped with a new wrecker body (manufactured by W.T. Stringfellow and Co., Nashville , Tennessee ) and made ready for duties as a GM dealership tow truck.
  85. 1939 Chevrolet Tow Truck

    So you wish to hear about my 1939 Chevrolet, grain bed, ton and a half tow truck. Well folks it is what I call a “REAL TRUCK”. This baby was built to work and be tough. Quality was important to vehicle builders of the pre-war era.
  86. 1936 Oil Tanker

    The truck (a 1936 1/2 Chevy high cab) was the very first truck that Mr. Hess himself drove around Woodbridge, NJ in the early days. In those days it was not gasoline he hauled, it was primarily heating fuel oil. The truck remained in service up into the early fifties at which time it underwent a partial overhaul. When I met the truck it had spent the last twenty something years in the HOVIC (Hess Oil Virgin Islands Corp) plant in the US Virgin Islands being used as a prop.
  87. 1947 Laundry Truck

    Its early 1947 and the U.S. has been struggling over a year to get factories back to producing domestic goods for the new post World War II economy. Car and truck hungry customers are expecting a year’s wait for each new vehicle ordered.
  88. 1948 Chevrolet Dump Truck

    This is my 1948 Chevy 6100 Series, 2 ton short dump truck. I used it for remodeling business in Ledyard, CT. The truck has been in use by me for 8 years. After purchasing it, I have sought to keep her looking as original as possible. This is a long term project.
  89. 1946 Chevrolet Dually 1 1/2 ton

    Ad for 1946 Chevrolet 1 1/2 ton dually
  90. 1953 Chevrolet Ambulance

    Almost unchanged in 45 years! The second owner repainted the two doors to cover the town lettering, then added the "Moblegas" decals. Yes, the hubcaps, bumpers, and grill back splash bars are still the correct gray color due to 1953 Korean War shortages.
  91. 1967 Chevrolet Heavy Hauler

    Wow! Now this is a real work truck. Used almost daily, it was bought from the original owner in 1985. This 1967 Chevrolet 1 ½ ton is a true heavy hauler. It's original 283 V-8, 4 speed transmission, single speed rear end, and high output heater remains in place.
  92. Plaid Valve Covers

      Strange but true, 305 V-6 valve covers on 1963 GMC 1/2 ton pickups came with a red, yellow, and black plaid design. The red color was used on the remainder of the engine without the yellow and black markings. These photos are of an original untouched V-6 GMC engine. At this time, we are unsure why GMC used this...
  93. GM Vintage 1955 and Older Overdrive

      Chevrolet's 1/2 ton and car 3 speed overdrive transmission was optional equipment installed on the assembly line during the 1950's. The reduction of engine RPM's in high gear resulted in less wear on the drive train as well as additional speed on level roads. Today, this is still important but of increased importance is better fuel economy. The standard...
  94. First Year Oil Filter

      It's the first year for the successful Chevrolet V-8. (This basic small block design continues even today over 50 years later.) One very unique characteristic of this first year V-8 is the lack of a traditional block connection for a positive flow oil filter. For this one year, this 265 engine carried the by-pass oil filter system much like...
  95. 1963-1966 Power Steering

      Chevrolet linkage-type power steering is now available optionally on Series C10, 20, 30 models. This was formerly a dealer installed item. The equipment consists of a hydraulic pump, power cylinder, control valve, relay rod and hoses. The power cylinder is mounted to the side of the engine and is connected to the control valve through the hoses. The control...
  96. 1955-1959 Starters

      Two totally different 12 volt starters were used on the 235 six cylinder Chevrolet light trucks during 1955-1959. They attach to different bellhousings and are not interchangeable. Hydromatic 3 Bolt Starter As shown in the photos, the Hydramatic transmission starter has three bolt holes for securing it to the bellhousing. A solenoid on top reacts to the drivers key...
  97. 1955-1959 Power Steering

      Chevrolet's linkage-type power steering is available as an RPO (Regular Production Option) on all models except Forward Control Chassis. New ease and fingertip steering control are provided because up to 80 percent of the steering work is done by hydraulic power. Maneuvering a heavily loaded truck in a small space becomes much easier, and straightaway highway travel is less...
  98. 1955-1957 Radiator Shroud

      With the introduction of the new small block V-8's in 1955 Chevrolet trucks, modified sheet metal was created to help in cooling. The new truck design came standard with the proven 235 inline six cylinder but when an optional V-8 was added, cooling modifications were necessary. The short length V-8's cooling fan was too far from the radiator and...
  99. 1936 Chevrolet Open Express

    Just imagine a truck designed strictly for work duties that has survived almost 70 years! In 1936, our country was still feeling the effects of the "Great Depression". When you spent your money for a 1 1/2 ton truck, it had to pay it's way. Therefore, few big trucks like this 1936 have survived. They were worked from the first day of delivery!
  100. 1934 Chevrolet Panel Truck

    What a rare panel truck! This little 1934 Chevrolet is almost a "one of a kind". With it being under construction, we just had to share these pictures.

Items 1 to 100 of 333 total

Page